Joined in 2023 
82 
63 About this deal
We would, of course, be remiss if we didn't mention Vivo Low Profile Mic Arm for daily usage. The vivo lowprofile mic arm is very adjustable, it works wonderfully and has an upgraded design. All necessary hardware and instructions are provided to get your stand assembled and microphone secured in no time. This stand ’s versatility makes it perfect for office presentations, studio performances, educational lectures, and more. This boom will hold a massive 5 lbs (2.3kg) of maximum weight, making it ideal for those with heavier or larger, more expensive microphones. You can hang your pride and joy with peace of mind and watch it dangle in front of your face in all its shining glory.
If your m!ka Arms ever squeak or if you can't put your mic in position smoothly, there is an easy solution for that: By swapping only the joint instead of the whole m!ka On Air Mic Arm, you have the option to easily upgrade your existing m!ka On Air Arm with CleanVision® lighting characteristics in dual color. How easy it is to swap head joints is shown in this short video tutorial.
Pro Lists
For the Shure SM7B and MV7, we recommend using the Rode PSA1. It can support between 700 and 1.1kg of weight, which is right in the range of both the Shure SM7Band Shure MV7 microphones. The arm is compatible with Blue Yeti, Blue Snowball, shure mv7, sm7b, hyperx quadcast, Fifine and other mics. Lastly, the ewonlife low profile mic arm is made of high quality with an internal spring, It is quiet, no squeaks or sounds when adjusted. While on the smaller size, this mic boom arm is a solid addition to most studios, and comes with a few unique features not seen on other models. Make sure that all three T-screws are not too tight but in a somewhat loose position. Then identify the screw on the bottom of the m!ka Mic Arm and adjust your arm with your mic attached to have it levitate in your favored position. RODE has a reputation for creating some of the most legendary microphones in the world. Unsurprisingly, their RODE PSA1 microphone arm also holds legendary status due to how often these are sold out.
The added weight capacity is largely due to the redesigned ‘parallelogram spring design’, which also affords you precise mic placement and super-smooth movement.However, with its smaller size factor, the Yellowtec m!ka does not extend as far as some of the other arms on this list. The reach sits at around 21 inches, with a maximum weight load of 1.98 pounds. That’s not insignificant, but it could limit you depending on the size of your desk/setup. Note: Adjust Wave Mic Arm vertically is only possible when tension is reduced. Tension must be applied to hold Mic Arm LP and microphone in place after adjustment.
The arm comes with a c-clamp mount (with 2" maximum) for attaching to a desk or tabletop. And, it is designed to be top notch, It sounds great and has a stable design. Lastly, the samson low profile mic arm is deep, it is made of plastic construction and has a compact design. Unlike traditional mic stands, which take up space, a suspension boom scissor arm stand is easily stored. Not all microphone boom arms are permanently fixed to the chosen location. "Permanent" just refers to mounts that involve screws or other methods of securing the microphone into place other than clamps. The arm is great for extra cables, is incredible, It is great for full rotation and has a professional design. And, it is highly functional, It is built with incredible build quality and has a heavy - duty design. Finally, the bietrun low profilemic arm is highly recommend, moves freely, it is dynamic and has an aesthetically pleasing design. Once the arm is properly installed and tensioned (some mics are heavier than others of course) it’s a dream to use. I found that my microphone (I tested this with the Elgato Wave:1 and the HyperX Quadcast S) stayed exactly where I put them, and I think that a mic arm that comes from underneath your monitors looks a lot cleaner than an arm that towers over your desk like an excavator arm, though that’s of course just my subjective opinion.But of course the above is inherent to a low profile microphone arm. If you have a lot of clutter on your desk or you want a lot of clearance you should probably go for a regular mic arm (Elgato also sells a regular mic arm) but I’m just mentioning it to be complete in case you’re considering this arm. The arm body has two spring-loaded sections that are both squeak-free and flexible — making it a perfect choice for broadcast radio studios or voice-over studios. Finally, the hola music low profile mic arm is perfect for studio settings, can be bought for good value, It feels solid and has a nice design. The RODE PSA1 contains few bells and whistles, but it gets the job done with a maximum microphone weight load of 2.4 lbs (1.1kg). Also please have a look at the m!ka Briefing Book. With the help of graphics, it shows you what you should pay attention to and serves as a step-by-step guide.
Setting it is as easy as attaching the desk clamp where you’d like and then placing the arm in the holder. Depending on your placement, the added riser makes it easy for the Wave Mic Arm to reach right over top of your monitor if that’s how you like it. One thing to note is that if you want the arm to come from under, you’re better off going with the LP version. Just a warning. Elgato Wave Mic Arm Specs You're looking for information about how to mount m!ka? Or you're wondering about how to combine the m!ka System's various elements? The Bietrun low profile mic arm's superior materials make sure that it ages well with use. The Bietrun Low Profile Mic Arm is the biggest difference between our mic stand and others is that our springs are all internal, more secure and beautiful. Adjustable tension, If you are hanging a heavier or light mic, you can increase or reduce the stretch, using a screwdriver to adjust the screw on the clamp base to adjust the stretching force. The surface adopts anodic oxidation craft, mic boom arm appear more textured. Hola music, low profile mic arm is the epitome of what a great arm should be. The Hola Music Low Profile Mic Arm is perfect for a home studio, is great for customer service, it has support weight and has a steel design. The Manufacturer says: The ergonomic center clutch on our onstage mic stand allows for easy height adjustment. This microphone boom stand includes standard US 5/8 - 27 threads as well as 2 clip - on cable holders to keep things neat and tidy.
To change you m!ka Mic Arm's on air signaling color from red to white simply reverse the polarity of the drive voltage.
Great Deal 
New Comment